FMC17

BayLynx has designed and developed a Front Discharge spreader that has revolutionized the industry. Why a Front Discharge? The answer is simple. There's only one person on board; the operator. He drives the truck, pulls right up to the job site, positions the truck and throw conveyor with pin point accuracy, and then spreads the product. We thought that if we could make things easier for the operator, we could make them more profitable for you. With the Front Discharge spreader, the operator can get on site faster and safer, unload more conveniently, and head off to the next site sooner.

Advantages to a front discharge:

1. Pull into a job site, not backing into.

  1. Safety - seeing where you are going.
  2. Less stress on equipment easier to pull in loaded and back up empty.
  3. Job site doesn't need to be developed for truck to get into required area.

2. Driver controls conveyor from inside cab.

  1. Safety - improved visibility of throw conveyor and material placement
  2. Manpower savings - eliminates 1-2 helpers. Contractors like it better & will demand a front discharge over rear.

3. Front discharge spreaders have higher resale value.

4. Introducing front discharge into your market area will give you a competitive edge.

Our Rear Discharge unit works so well... we thought we would turn things around!

BAYLYNX IS THE FIRST TO COMBINE ALL THE BENEFITS OF A FRONT DISCHARGE UNIT WITH THE MULTICAT STONE SPREADER. GIVING THIS MACHINE THE ABILITY TO SPREAD NUMEROUS TYPES OF MATERIAL SUCH AS TOPSOIL, MULCH, STONE, AND SAND, WHILE YOU ENJOY THE COMFORTS OF BEING INSIDE YOUR CAB!

TWO GREAT MACHINES IN ONE

Spread topsoil, mulch, stone, sand...

Features

  • Multi-purpose
  • Ability to break clumps & lumps
  • Plastic Liner
  • Larger Capacity
  • Full Control of Load Suspension Beam
  • New feed conveyor drive
  • Low center of gravity

Options

  • Dual station hydraulic controls
  • Cable or radio remote controls
  • Electric powered tarp
    • Solid vinyl tarp cover (For Cramaro Slide-N-Go system only)
    • Friction or Power Drive Super-ShieldTM installed onto throw conveyor
    • Custom paint colour
    • Aluminum fenders
    • Aluminum oil reservoir
    • Closed circuit monitor and cameras
    • Planetary swing frame
    • Roll-Rite tarp system

Multicat Spreader Front Discharge:

  • 17 Yard Capacity
  • 75 gal. hydraulic reservior with cooler
  • Electronic in-cab controls with option to radio remote
  • Excellent ground and road visibility
  • Wider chute opening, with load suspension beam
  • Hopper lined with 1/4" thick UHMW
  • Spreads up to 85' from the front of the truck

Features/Specifications - Phoenix Chassis:

Visit Indiana Phoenix on the Web

  • Fuel Tank: 70 Gallon Steel
  • Front Axle: MeritorMX-23-160 23000 lb.
  • Front Axle Tire: 445 / 65 R22.5
  • Front Axle Ratio: 5.38
  • Front Axle Wheel: Aluminum Disc
  • Drive Axle: Meritor 46-160 4600 lb.
  • Drive Axle Suspension: Hendrickson HN 52"
  • Dirve Axle Tire: 445 / 65 R22.5
  • Engine: CAT C-12 400 HP
  • Transmission: Allison HD 4560 6 Speed
  • Transfer Case: Meritor 1:1
  • Cab: Stainless Steel, installed on left side