| OVERVIEW
Our Cambercat machines are specially designed to induce permanent camber into wide flange, channel and tubular beams.
Our machines are designed for ease and speed of operation and are totally self contained so that they may be moved and stored when not in use. All mechanical and hydraulic components are standard items, and parts and service are readily available nationwide.
Kits for CAMBERCAT Machines
All CAMBERCAT machines are available in hydraulic and design kits. With these orders, Baylynx supplies all components including measuring device, power unit, hydraulic valves, cylinders, hoses and fittings, and a complete set of fabrication and detail drawings.
NOTE: The drawings and all technical information will remain the property of Baylynx / Peddinghaus. The original drawings are not to be reproduced, and must be returned to the dealer upon completion of assembly.
This can be both an economical and practical way to obtain a CAMBERCAT Press. You could start to fabricate the frame immediately while the components are being processed. This will shorten your lead time, and cut down on freight to your location.
Options
- -100 amp fusible disconnnect
- push button start/stop
- motor starter 440 volts or 550 volts
- c/w electronic overload - same as above, except motor starter is 230 volts
- 36" stroke main cylinders
- 36" stroke with lift & kneel
plus (4) internal powered conveyors
- Digital read out
|
